Filtering Mac Add; Dynamic Age - ZyXEL Communications GS1900 Series User Manual

Table 88 Configuration > MAC Table > Filtering MAC (continued)
LABEL
Action
Delete
Add

21.2.4 Filtering MAC Add

Use this screen to add new Filtering MAC addresses. Click Configuration > MAC Table > Filtering MAC >
Add to open this screen.
Figure 156 Configuration > MAC Table > Filtering MAC > Add
The following table describes the labels in this screen.
Table 89 Configuration > MAC Table > Filtering MAC > Add
LABEL
Add Filtering MAC
MAC Address
VLAN
Apply
Cancel

21.2.5 Dynamic Age

Use this screen to enter the Dynamic MAC Age. The dynamic MAC age is how long all dynamically
learned MAC addresses remain in the MAC address table before they age out (and must be relearned).
Click Configuration > MAC Table > Dynamic Age to open this screen.
Figure 157 Configuration > MAC Table > Dynamic Age
The following table describes the labels in this screen.
Table 90 Configuration > MAC Table > Dynamic Age
LABEL
Dynamic MAC Age
Aging Time
Chapter 21 Configuration: MAC Table
DESCRIPTION
Click Delete to remove the entry.
Click Add to create a new Filtering MAC entry.
DESCRIPTION
Enter the MAC address of the device.
Select the VLAN group to associate the filtering object MAC address.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Enter the aging time of the MAC address. The value can be between 10 and 630 seconds.
GS1900 Series User's Guide
149