Basic Operation; Using The Front Panel Buttons; User Configuration Options - LDG AT-1000PROII Operation Manual

BASIC OPERATION

Using the Front Panel Buttons

All operations of the AT-1000ProII are controlled via the front panel buttons. Although there
are a total of eight buttons on the front panel, there are more than eight functions that can be
carried out on the AT-1000ProII. In order to accommodate the many functions of the AT-
1000ProII, the operation performed by pressing a particular button is determined by the manner
in which the button is pressed, and no operation begins until the button is actually released.
The various types of button presses are described here:
Momentary or short press: The button is pressed and released immediately.
Medium Press: The button is held for one-half to 2.5 seconds, and then released.
Long Press: The button is held for more than 2.5 seconds, and then is released.
FUNC -> Button: The FUNC button is pressed first, then the button is pressed momentarily
and released. e.g.: FUNC -> Ant means "Press the Func button and release, then press the Ant
button and release."

User Configuration Options

The AT-1000ProII offers several user-settable options that allow the behavior of the tuner to
adapt to many different operating circumstances. Most of these options are accessed by placing
the tuner in Function mode, which is done by pressing and releasing the Func button, and then
pressing the desired button to activate the particular configuration option while in function mode.
To confirm entry into Function mode, the AT-1000ProII will flash an "up arrow" on the
LED display after the Func button is pressed.
PAGE 10