Plc Button - Devolo Magic 2 WiFi next Manual

2.2.1PLC button

Starting up a new devolo Magic PLC network
devolo Magic adapters that are in the factory de-
fault condition, i.e. have been recently purchased
or successfully reset (see Chapter 3.5 Removing
the devolo Magic adapter from a PLC network),
automatically start to attempt to pair (establish a
PLC connection) with another devolo Magic adap-
ter when reconnected to the mains supply.
After plugging the devolo Magic adapters into
available power sockets, a new devolo Magic net-
work is established automatically within 3 minutes.
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3.1 Automatic
devolo Magic PLC network.
Expanding an existing devolo Magic PLC net-
work by adding another devolo Magic adapter
In order to use a new devolo Magic 2 WiFi next in
your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
devices as a network. This is accomplished by using
a shared PLC password.
setup for a new
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3.2 Expanding an existing PLC network
by adding
devolo Magic 2 WiFi next.
devolo Magic 2 WiFi next
Introduction 16
another