Reading The Wi-Fi Indicator Light - Devolo Magic 2 WiFi next Manual

21 Introduction
Before initiating networking, write down
the
devolo Magic 2 WiFi next. You can find the
device's unique key on the label on the back
of the housing.
In
devolo Magic 2 WiFi next to your laptop,
tablet or smartphone later via Wi-Fi, enter
the noted Wi-Fi key as the network security
key.
In order to switch Wi-Fi off, press and hold the
b
Wi-Fi button longer than 3 seconds.
In order to switch Wi-Fi back on, briefly tap
b
the Wi-Fi button.
Connecting Wi-Fi devices via WPS
If the device settings are still their factory
b
defaults, tap the Wi-Fi button to activate
WPS.
If the Wi-Fi connection was switched off and
b
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and
again to activate WPS.
If the Wi-Fi connection is switched on and you
b
want to copy these settings to another
devolo Magic 2 WiFi next
Wi-Fi key for
order to connect
devolo Magic adapter, go to Chapter
the
Config Sync.
WPS is one of the encryption standards de-
veloped by the WiFi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
the
formation, refer to Chapter 4.4.7 Wi-Fi Pro-
tected Setup (WPS).

2.2.4 Reading the Wi-Fi indicator light

The integrated Wi-Fi indicator light (LED) shows
the status of the devolo Magic 2 WiFi next with
solid or flashing light
4.7.5