Plc Button - Devolo dLAN 550 WiFi Manual

Fig. 2: devolo dLAN 550 WiFi with country-specific plug

2.4.1PLC button

This button controls the following functions:
Encrypting the dLAN network
b
To encrypt your dLAN network individually,
press each PLC button on the connected
devices for approx. 1 second – within 2 minu-
tes.
b
To remove a dLAN device from your network,
press the PLC button on the corresponding
device for at least 10 seconds. For more infor-
mation, refer to Chapter 3.3 Connecting the
dLAN 550 WiFi.
Reading the PLC indicator light
The integrated indicator light (LEDs) shows the
dLAN status for the dLAN 550 WiFi by illuminating
and/or flashing:
Check whether the adapter is connected to the
mains supply correctly and whether the encryp-
tion process has been carried out successfully.
For more information about this, refer to 3.3
Connecting the dLAN 550 WiFi.
Introduction 13
devolo dLAN 550 WiFi