Connecting The Devolo Magic 2 Wifi Next; Automatic Setup For A New Devolo Magic Plc Network - Devolo Magic 2 WiFi next Manual

25 Initial use
3.3 Connecting the
devolo Magic 2 WiFi next
In the following sections we describe how to con-
nect the devolo Magic 2 WiFi next and integrate it
into a network. We clarify the exact procedures
based on various possible network configurations.
For the permitted voltage range for operat-
ing the device and the power consumption,
refer to the type plate on the back of the de-
vice. For more technical information about
our products, refer to the product area at
www.devolo.com.
devolo Magic 2 WiFi next
3.3.1 Automatic setup for a new
devolo Magic PLC network
Connect the devolo Magic 2 LAN 1-1 to your
1
Internet access device's network port (e.g. your
Internet router) using the network cable
included (Cat-5e UTP, not for in-wall use).
Plug both devolo Magic adapters into available
2
power outlets within 3 minutes. When the
LEDs on both adapters flash white at regular
intervals of 0.5 sec., they are ready to operate
and automatically start the process of estab-
lishing an encrypted connection to each other
(see Chapter 2.2.2 Reading the PLC indicator
light).