The Dlan 1000 Mini; Encryption Button - Devolo dLAN 1000 mini Manual

Hide thumbs Also See for dLAN 1000 mini:
Table of Contents

Advertisement

11 Introduction
devolo dLAN 1000 mini

2.2 The dLAN 1000 mini

The dLAN 1000 mini is equipped with
b
one fast ethernet connector,
b
one dLAN indicator light,
The LED status display can be deactivated with
the
devolo Cockpit-Software
devolo Cockpit).
b
an encryption button with reset function (button
with house symbol).
Fig. 2 dLAN 1000 mini with country-specific connector

2.2.1 Encryption button

This button has the following functions:
Encrypting the dLAN network
b
To encrypt your dLAN network individually, press
each encryption button on the connected
devices within 2 minutes, for approximately 1
4.3
(see
second each.
b
To remove a dLAN device from your network,
press the encryption button on the correspond-
ing device and hold for at least 10 seconds.
Reading the dLAN indicator light
The integrated indicator light (LED) shows the dLAN
status for the dLAN 1000 mini by illuminating and/or
flashing:
Check whether the adapter is connected to the
mains supply correctly and whether the encryp-
tion process has been carried out successfully.
For more information about this, refer to 3.3
Connecting the dLAN 1000 mini.

Advertisement

Table of Contents
loading

Table of Contents