Plc Button - Devolo dLAN 1200+ WiFi ac Manual

Fig. 2: devolo dLAN 1200+ WiFi ac with country-
specific plug/socket

2.4.1PLC button

This button controls the following functions:
Encrypting the dLAN network
b
To encrypt your dLAN network individually,
press each PLC button on the connected
devices for approx. 1 second – within 2 minu-
tes.
b
To remove a dLAN device from your network,
press the PLC button on the corresponding
device for at least 10 seconds. For more infor-
mation, refer to Chapter 3.3 Connecting the
dLAN 1200+ WiFi ac.
Reading the PLC indicator light
The integrated indicator light (LEDs) shows the
dLAN status for the dLAN 1200+ WiFi ac by illumi-
nating and/or flashing:
Check whether the adapter is connected to the
mains supply correctly and whether the encryp-
tion process has been carried out successfully.
For more information about this, refer to 3.3
Connecting the dLAN 1200+ WiFi ac.
devolo dLAN 1200+ WiFi ac
Introduction 14