System Requirements; Functions; Encryption Button - Devolo dLAN pro 1200+ PoE Manual

18 Initial use
devolo dLAN pro 1200+ PoE

3.2 System requirements

b Operating systems: Windows 7 (x86/x64), Win-
dows 8 (x86/x64), Windows 10 (x86/x64), Linux
(Ubuntu 12.4) and all operating systems with net-
work support
b Network connection
Please note that your computer or other de-
vice must have a network adapter with a
network port.
To set up a dLAN pro network, you
need at least two dLAN pro devices
(200 Mbps, 500 Mbps,
1200 Mbps).

3.3 Functions

The dLAN pro 1200+ PoE is equipped with:
b 2 indicator lights (LEDs)
b 1 encryption button
b 1 PoE button
b 1 reset button
b 1 Ethernet port with PoE functionality
b 1 integrated electrical socket

3.3.1 Encryption button

This button controls the following functions:
Encrypting the dLAN pro network
b To encrypt your dLAN pro network individually,
press each encryption button on the connected
devices for approximately 1 second—within 2
minutes.
b To remove a dLAN pro device from your network,
press the encryption button on the correspond-
ing device for at least 10 seconds.
For security reasons, the function of
the encryption button can be disa-
or
bled in dLAN AVpro manager.
For more information on dLAN encryption, refer
to Chapter 4 dLAN pro network.
Indicator light
The indicator light (LED) shows all of the statuses for
the dLAN pro 1200+ PoE by illuminating and/or flash-
ing in different ways:
b The LED flashes red quickly at regular intervals
if the dLAN pro 1200+ PoE is connected to the
mains supply but there is no dLAN connec-
tion.