Table of Contents
Advertisement
2.2 The dLAN 1000 duo+
The dLAN 1000 duo+ is equipped with
two fast ethernet connectors,
b
b
one dLAN indicator light,
The LED status display can be deactivated with
the
devolo Cockpit-Software
devolo Cockpit).
an encryption button with reset function (next to
b
the network connectors),
b
One integrated electrical socket.
Fig. 2 dLAN 1000 duo+ with country-specific connector
and corresponding electrical socket
2.2.1 Encryption button
This button has the following functions:
Encrypting the dLAN network
To encrypt your dLAN network individually, press
b
each encryption button on the connected
devices within 2 minutes, for approximately 1
(see
4.3
second each.
To remove a dLAN device from your network,
b
press the encryption button on the correspond-
ing device and hold for at least 10 seconds.
Reading the dLAN indicator light
The integrated indicator light (LED) shows the dLAN
status for the dLAN 1000 duo+ by illuminating and/or
flashing:
Check whether the adapter is connected to the
mains supply correctly and whether the encryp-
tion process has been carried out successfully.
For more information about this, refer to 3.3
Connecting the dLAN 1000 duo+.
Introduction 10
devolo dLAN 1000 duo+
Advertisement
Table of Contents
