Expanding An Existing Plc Network By Adding Another Devolo Magic 2 Wifi Next; Changing The Network Password - Devolo Magic 2 WiFi next Manual

When the LEDs on both devolo Magic
adapters light up solid white, your
devolo Magic network has been set up ac-
cording to your individual specifications
and is protected from unauthorized access.
Using a Starter Kit, you have now successful-
ly completed the installation.
If using a Whole Home WiFi Kit, please fol-
low the installation instructions in chapter
3.3.2 Expanding an existing PLC network
by adding
devolo Magic 2 WiFi next to connect the
second devolo Magic 2 WiFi next.
3.3.2Expanding an existing PLC net-
work by adding another
devolo Magic 2 WiFi next
Before you can use the devolo Magic 2 WiFi next in
your devolo Magic network, you have to connect it
to the network with your existing devolo Magic
adapters. This is accomplished using a shared pass-
word.
Plug the devolo Magic 2 WiFi next into an
1
available power outlet. When the LED flashes
white at regular intervals of 0.5 seconds, the
adapter is ready to operate but not yet
integrated into a devolo Magic network (see
Chapter 2.2.2 Reading the PLC indicator
light).
Within 3 minutes, press the PLC button on a
2
devolo Magic
devolo Magic network for approximately 1 sec.
The new devolo Magic adapter pairs auto-
matically, so no button needs to be pressed.
The LED on this adapter now also flashes
white.
another
When the LEDs light up solid white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
With each pairing operation, only one addi-
tional adapter can be added at a time.

3.3.3 Changing the network password

A network password can also be changed in the
following ways:
Using the web interface of the devolo Magic
b
adapter (see Chapter 4.5 Powerline)
or
Initial use 26
adapter in your existing
devolo Magic 2 WiFi next