Functions; Monitoring Light; Network Connection; Encryption Button - Devolo dLAN pro 1200+ Manual

16 Installation
devolo dLAN pro 1200+
Please note that your computer or other de-
vice must feature a network device with a
network port.
To set up a dLAN pro network, you
need two dLAN
200 Mbps, 500 Mbps
1200 Mbps).

3.3 Functions

The dLAN pro 1200+ has a monitoring light (LED), one
network jack and an encryption button.

3.3.1 Monitoring light

The monitoring light (LED) shows all of the statuses for
the dLAN pro 1200+ by illuminating and/or flashing in
different ways:
b The LED flashes quickly in red at uniform inter-
vals if the dLAN pro 1200+ is connected to the
mains supply but there is no dLAN connec-
tion.
b The LED lights up in white if the
dLAN pro 1200+ is ready to operate and there
is a dLAN connection.
b The LED flashes quickly in white at uniform
intervals if the encryption process (pairing) is
being performed in the dLAN pro network.
b The LED flashes in white at irregular intervals if
the dLAN pro 1200+ is in PowerSave mode.
pro devices
b The LED flashes in red at uniform intervals if the
and
data transmission rate of the dLAN pro 1200+ is
not optimal. For information to improve the data
transmission rate, please see the chapter 5.1
Bandwidth optimization.
The function of the LED status display
can
dLAN AVpro manager software.

3.3.2 Network connection

This is the connection point on the dLAN pro 1200+
for connecting it to a computer or another network de-
vice with the network cable (included).

3.3.3 Encryption button

Data encryption at the touch of a button; For more in-
formation on the functions of the encryption button,
please see the chapter 4.2 dLAN pro network en-
cryption at the touch of a button.
For safety reasons, you can deacti-
vate the encryption button in the
dLAN AVpro manager software.
be deactivated in the