Functions; Monitoring Light; Network Connection; Encryption Button - Devolo dLAN pro 1200+ triple Manual

cise Pangolin" (x86/x64), Ubuntu 13.04 „Raring
Ringtail" (x86/x64), Ubuntu 14.04, OpenSuse
12.3 (x86/x64)
b Network connection
Please note that your computer or other de-
vice must feature a network device with a
network port.
To set up a dLAN pro network, you need
two dLAN pro devices
500 Mbps and 1200 Mbps).

3.3 Functions

The dLAN pro 1200+ triple has a monitoring light
(LED), three network jacks and an encryption button.

3.3.1 Monitoring light

The monitoring light (LED) shows all of the statuses for
the dLAN pro 1200+ triple by illuminating and/or flas-
hing in different ways:
b The LED flashes quickly in red at uniform inter-
vals if the dLAN pro 1200+ triple is connected to
the mains supply but there is no dLAN
connection.
b The LED lights up in
dLAN pro 1200+ triple is ready to operate and
there is a dLAN connection.
b The LED flashes quickly in white at uniform
intervals if the encryption process (pairing) is
being performed in the dLAN pro network.
b The LED flashes in white at irregular intervals if
the dLAN pro 1200+ triple is in energy-saving
mode.
200 Mbps,
b The LED flashes in red at uniform intervals if the
data transmission
dLAN pro 1200+ triple is not optimal. For infor-
mation to improve the data transmission rate,
please see the chapter 5.1 Bandwidth optimi-
zation.
The function of the LED status display
can
dLAN AVpro manager software.

3.3.2 Network connection

These are the
dLAN pro 1200+ triple for connecting it to computers
or other network devices with network cables.

3.3.3 Encryption button

Data encryption at the touch of a button; For more in-
formation on the functions of the encryption button,
Installation 15
white if the
rate of
be deactivated in the
connection points on
devolo dLAN pro 1200+ triple
the
the