Step 3 Route & Connect Outside Antenna To Booster; Step 4 Power Up The Booster & Optimize The System - Wilson Electronics WilsonPro Single Room Installation Manual

STEP 3 Route & Connect
Outside Antenna To Booster
Connect the
Antenna and route and connect
cable to
connections should be finger
tightened only.
STEP 4 Power Up The Booster
& Optimize The System
Plug the Power Supply into wall outlet then
connect into end of Booster.
NOTE: We strongly recommend using a
power strip with surge protection.
4
Cable to Outside
Booster. All
Status Lights will
appear at the top