Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
B.
C.
Side Panel
Side Panel
1 pc.
1 pc.
L.
Rail
1 pc.
M.
Rail
3 pcs.
Hardware List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Carton 20 05420 0691 is also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05420 0692
Pantry
F.
Side Panel
1 pc.
N.
Door
1 pc.
M3.5x38
M6x32
Wood Screw (long)
Head Cap Bolt
2 pcs. (+1 extra)
4 pcs. (+1 extra)
M3x14
Wood Screw
Magnet
for Magnet
2 pcs.
4 pcs. (+1 extra)
G.
H.
Side Panel
Back Panel
1 pc.
2 pcs.
O.
P.
Door
Door
1 pc.
1 pc.
Flat Washer
4 pcs. (+1 extra)
M3x15
Wood Screw
8 pcs. (+1 extra)
888-680-7460, 877-831-0319
I.
J.
Upright
Back Panel
1 pc.
2 pcs.
Spring Washer
Knob
4 pcs. (+1 extra)
6 pcs.
M4x25
Adjustable Pin
Machine Screw
16 pcs. (+1 extra)
6 pcs.
K.
Upright
1 pc.
Q.
Door
1 pc.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 20 05420 0692
Summary of Contents for Home Styles 20 05420 0692
- Page 1 8 pcs. (+1 extra) 16 pcs. (+1 extra) 6 pcs. Carton 20 05420 0691 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/7 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the screws until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/7 STEP 3 Turn unit to its’ upright position. Attach Middle Panel (D) to unit, then flip Locks. Lock Lock STEP 4 Attach Rail (M) to Side Panel (F), then flip Locks. Attach Upright (K) to unit. Slide Back Panels (J) into position. Attach Rail (M) to unit, then flip Lock.
- Page 4 Assembly Instructions 4/7 STEP 5 Magnet Wood Screw Attach Magnet to Top (A) with Wood Screws into pre-drilled holes. Attach Top (A) to unit from Step 4, then flip Locks. Lock STEP 6 Attach unit from Step 5 to unit from Step 3, then flip Locks. Insert Adjustable Pins into side panels at desired level.
-
Page 5: Part List
Assembly Instructions 5/7 Drawer (S) STEP 7 Attach Drawer Sides (S3) and (S4) to Drawer Back (S2), then flip Locks. (See Figures 6 and 7) Lock STEP 8 Figure 6 Figure 7 Slide Drawer Bottom (S5) into groove. Attach Drawer Front (S1) to unit, then flip Locks. Machine Screw Knob Lock... - Page 6 Assembly Instructions 6/7 STEP 10 Place Shelves (R) into position. Attach Doors (N), (O), (P) and (Q) by sliding door hinges into side panel hinges. (See Figure 8) Attach Knobs to Doors with Machine Screws. Slide Drawer (S) into position. Knob Machine Screw Figure 8...
-
Page 7: Hardware List
Assembly Instructions 7/7 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 12 Anchor in wall Wall Screw Pre-drilled hole Bracket Place unit at desired location. on wall at top of unit 3/8”... - Page 8 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 05420 0692 and is the answer not in the manual?
Questions and answers