Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
D.
Middle Panel
1 pc.
Hardware List
M x
6 30
Hex Wrench
Head Cap Bolt
1 pc.
4 pcs. (+1 extra)
Small
Hex Wrench
Cam Lock
1 pc.
26 pcs. (+4 extra)
Carton 20 05506 0682 is also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05506 0681
Buffet
E.
Middle Panel
1 pc.
M
Wood Screw
Adjustable Pin
for Hinge
24 pcs. (+1 extra)
24 pcs. (+1 extra)
Cam Lock Screw
Hinge
26 pcs. (+2 extra)
4 pcs.
B.
Side Panel
1 pc.
F.
Door
1 pc.
3.5
x1
5
M
3.5 15
x
Wood Screw (short)
12 pcs. (+1 extra)
M4x25
Machine Screw
4 pcs.
888-680-7460, 877-831-0319
C.
Side Panel
1 pc.
G.
Door
1 pc.
M
3.5 25
x
Wood Screw (long)
31 pcs. (+1 extra)
M4x35
Machine Screw (long)
Handle
6 pcs.
5 pcs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 20 05506 0681
Summary of Contents for Home Styles 20 05506 0681
- Page 1 4 pcs. 4 pcs. 6 pcs. 5 pcs. Carton 20 05506 0682 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/11 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the screws unit each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/11 STEP 2 Cam Lock Attach Middle Panels (D), (E) to Top (A) with Cam Locks. (See Figure 2) Figure 2 Wood Screw (long) STEP 3 Attach Plinth (I) to Bottom (H) with Wood Screws (long), then tighten. Head Cap Bolt STEP 4 Attach unit from Step 3...
- Page 4 Assembly Instructions 4/11 STEP 5 Attach Back Panel (K) to unit with Cam Locks. Attach Back Panel (L) to unit with Cam Locks. Cam Lock STEP 6 Attach Side Panels (B) and (C) to unit with Cam Locks and Wood Screws (long). Wood Screw (long) Cam Lock...
- Page 5 Assembly Instructions 5/11 Wood Screw for Hinge Hinge STEP 7 Attach Hinges to Doors (F) and (G) with Wood Screws for Hinge into pre-drilled holes, then tighten. (See Figure 3) Figure 3 Handle Machine Screw Wood Screw for Hinge STEP 8 Turn unit to its upright position.
-
Page 6: Part List
Assembly Instructions 6/11 Drawer (M) Wood Screw (long) Bottom STEP 9 Attach Drawer Front (M1) and Drawer Back (M2) to Drawer Side (M3) with Wood Screws (long). Attach Drawer Side (M4) to unit with Wood Screws (long). Roller at back Wood Screw (short) STEP 10 Slide Drawer Bottom (M5) into groove. - Page 7 Assembly Instructions 7/11 Drawer (N) Wood Screw (long) Bottom STEP 12 Attach Drawer Front (N1) and Drawer Back (N2) to Drawer Side (M3) with Wood Screws (long). Attach Drawer Side (M4) to unit with Wood Screws (long). Roller at back Wood Screw (short) STEP 13 Slide Drawer Bottom (N5) into groove.
- Page 8 Assembly Instructions 8/11 Drawer (O) Wood Screw (long) Bottom STEP 15 Attach Drawer Front (O1) and Drawer Back (M2) to Drawer Side (M3) with Wood Screws (long). Attach Drawer Side (M4) to unit with Wood Screws (long). Roller at back Wood Screw (short) STEP 16 Slide Drawer Bottom (M5) into groove.
- Page 9 Assembly Instructions 9/11 Adjustable Pin Figure 6 Figure 5 STEP 18 Slide Drawers (M), (N) and (O) into position. Insert Adjustable Pins into side panels and middle panels at desired level. (See Figure 5) Place Shelves (J) into position. Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 6)
- Page 10 Assembly Instructions 10/11 Down Figure 7 Figure 7 Left Right Figure 8 Figure 8 Back Front Figure 9 STEP 19 If needed, adjust doors up or down by removing the front Wood Screws for Hinge and loosening slightly the back Wood Screws for Hinge from side panel, adjusting doors up or down and reinstalling screws.
-
Page 11: Hardware List
Assembly Instructions 11/11 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 20 Place unit at desired location. Anchor in wall Wall Screw Pre-drilled hole Bracket at top of unit on wall Drill a 3/8”... - Page 12 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 05506 0681 and is the answer not in the manual?
Questions and answers