Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
D.
Shelf
1 pc.
E.
Base
1 pc.
J.
Shelf
2 pcs.
Hardware List
Hex Wrench
Small Hex Wrench
1 pc.
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05186 0076
Bookcase
B.
Side Panel
1 pc.
Cam Lock Screw
8 pcs. (+1 extra)
C.
H.
Side Panel
Back Panel
1 pc.
4 pcs.
M6x25
Cam Lock
Head Cap Bolt
8 pcs. (+2 extra)
12 pcs. (+1 extra)
888-680-7460, 877-831-0319
F.
Rail
2 pcs.
G.
Rail
1 pc.
I.
Back Upright
2 pcs.
Adjustable Pin
8 pcs. (+1 extra)
Advertisement
Related Manuals for Home Styles 20 05186 0076
Summary of Contents for Home Styles 20 05186 0076
- Page 1 1 pc. 8 pcs. (+1 extra) 8 pcs. (+2 extra) 12 pcs. (+1 extra) 8 pcs. (+1 extra) Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/5 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/5 Figure 3 STEP 3 Attach Rails (F) and (G) to unit with Cam Locks. (See Figure 3) Cam Lock STEP 4 Slide Back Panels (H) into position. Slide Back Uprights (I) into position. Slide Back Panels (H) into position.
- Page 4 Assembly Instructions 4/5 STEP 5 Attach Side Panel (C) to unit with Cam Locks and Head Cap Bolts. Cam Lock Head Cap Bolt STEP 6 Head Cap Bolt Turn unit to its upright position. Attach Top (A) to unit with Head Cap Bolts. Insert Adjustable Pins into side panels at desired level.
-
Page 5: Hardware List
Assembly Instructions 5/5 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 7 Anchor in wall Wall Screw Pre-drilled hole Bracket on wall at top of unit Place unit at desired location. - Page 6 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 05186 0076 and is the answer not in the manual?
Questions and answers