Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
Hardware List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05050 0077
Closet Wall Hanging Unit
A.
Back Frame
1 pc.
F.
Back Frame
1 pc.
M6x16
Head Cap Bolt
Spring Washer
32 pcs. (+1 extra)
32 pcs. (+1 extra)
M6x13
M6x32
Tapered Bolt (short)
Tapered Bolt
8 pcs. (+1 extra)
2 pcs. (+1 extra)
B.
C.
Side
Side
1 pc.
1 pc.
G.
H.
Side
Side
1 pc.
1 pc.
Flat Washer
14 pcs. (+1 extra)
M6x44
Tapered Bolt (long)
8 pcs. (+1 extra)
888-680-7460, 877-831-0319
D.
Rail
3 pcs.
E.
Hanger
2 pcs.
I.
Shelf
1 pc.
J.
Shelf
1 pc.
K.
Base
1 pc.
Flat Washer (large)
18 pcs. (+1 extra)
M3x15
Wood Screw
Bracket
8 pcs. (+1 extra)
2 pcs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 20 05050 0077
Summary of Contents for Home Styles 20 05050 0077
- Page 1 8 pcs. (+1 extra) 8 pcs. (+1 extra) 2 pcs. (+1 extra) 8 pcs. (+1 extra) 2 pcs. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/8 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/8 STEP 2 Flat Washer Attach Side (C) to unit with Spring Washer Head Cap Bolts, Spring Washers, Head Cap Bolt Flat Washers, Tapered Bolts (short) and Tapered Bolts (long), tightening bolts only halfway Tighten all bolts used in Steps 1 and 2. Tapered Bolt (short) Tapered Bolt (long) Figure 4...
- Page 4 Assembly Instructions 4/8 STEP 4 Attach Side (G) to Back Frame (F) with Tapered Bolts (long), tightening bolts only halfway Tapered Bolt (short) Attach Rail (D) to unit with Flat Washer Head Cap Bolts, Spring Washers Spring Washer Head Cap Bolt and Flat Washers, tightening bolts only halfway.
- Page 5 Assembly Instructions 5/8 Flat Washer (large) Spring Washer Head Cap Bolt STEP 6 Attach Side (H) to unit with Head Cap Bolts, Spring Washers, Head Cap Bolt Spring Washer Flat Washers, Flat Washer (large) Flat Washers (large), Tapered Bolts (short) and Tapered Bolts (long), Tapered Bolt (long) tightening bolts only...
- Page 6 Assembly Instructions 6/8 STEP 8 Turn unit to its upright position. Place unit at desired location. Note: If assembling multiple Closet Wall Units together place all units at desired location. Level unit(s) by adjusting the adjustable levelers on bottom of unit(s). (See Figure 5) Figure 5...
-
Page 7: Hardware List
Assembly Instructions 7/8 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 9 Drill a 3/8” hole in wall in-line with Anchor in wall Wall Screw Pre-drilled hole Bracket pre-drilled hole at top of unit. - Page 8 Assembly Instructions 8/8 Wood Screw Bracket Figure 7 STEP 10 Note: If assembling multiple Closet Wall Units together, complete Step 10. Attach tops of units together with Brackets and Wood Screws into pre-drilled holes. (See Figure 7) Return to and complete Step 9.
- Page 9 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 05050 0077 and is the answer not in the manual?
Questions and answers