Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
B.
Shelf
1 pc.
C.
Shelf
2 pcs.
H.
Divider
1 pc.
Hardware List
Cam Lock
12 pcs.(+1 extra)
Tool(s) required for assembly: Phillips screwdriver, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05170 0307
Hutch
D.
Side Panel
1 pc.
I.
Back Rail
1 pc.
M3.5x16
Wood Screw
9 pcs. (+1 extra)
Cam Lock Screw
12 pcs.(+1 extra)
E.
F.
Side Panel
Back Upright
1 pc.
2 pcs.
J.
Back Rail
1 pc.
K.
Back Panel
1 pc.
M4x13
Wood Screw for Bracket
8 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
888-680-7460, 877-831-0319
G.
Back Panel
3 pcs.
Bracket
2 pcs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 20 05170 0307
Summary of Contents for Home Styles 20 05170 0307
- Page 1 12 pcs.(+1 extra) Cam Lock Screw Adjustable Pin Bracket 12 pcs.(+1 extra) 8 pcs. (+1 extra) 2 pcs. Tool(s) required for assembly: Phillips screwdriver, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/6 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/6 STEP 3 Slide Back Panel (G) into place. Attach Back Upright (F) to unit. Slide Back Panel (G) into place. Attach Back Upright (F) to unit. Attach Back Rail (I) to unit with Cam Lock. Slide Back Panel (G) into place. Cam Lock Cam Lock STEP 4...
- Page 4 Assembly Instructions 4/6 STEP 5 Slide Back Panel (K) into place. Attach Divider (H) to unit. Attach Top (A) to unit with Cam Locks. Cam Lock STEP 6 Insert Adjustable Pins into side panels at desired level. Place Shelves (C) into position. Adjustable Pin...
- Page 5 Assembly Instructions 5/6 STEP 7 Insert Wood Screws into pre-drilled holes of unit, then tighten. Wood Screw STEP 8 Attach Hutch to Buffet with Brackets by inserting Wood Screws for Bracket into pre-drilled holes, then tighten. (See Figure 3) Bracket Wood Screw for Bracket Figure 3...
-
Page 6: Hardware List
Assembly Instructions 6/6 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 9 Anchor in wall Wall Screw Pre-drilled hole Bracket on wall at top of unit Place unit at desired location.
Need help?
Do you have a question about the 20 05170 0307 and is the answer not in the manual?
Questions and answers