Table of Contents
Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
F.
Front Rail
2 pcs.
J.
Side Panel
1 pc.
Hardware List
Hex Wrench
Cam Lock
1 pc.
39 pcs. (+6 extra)
Small Hex Wrench
Cam Lock Screw
39 pcs. (+2 extra)
1 pc.
Carton 20 05003 0991 is also needed for assembly.
Tool(s) required for assembly:
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05003 0992
Bar
M.
Base
1 pc.
K.
L.
Side Panel
Middle Panel
1 pc.
1 pc.
Adjustable Pin
12 pcs. (+1 extra)
Magnet
1 pc.
Phillips screwdriver,
D.
Side Panel
2 pcs.
Q.
Foot Rest
1 pc.
M3x25
Wood Screw (long)
8 pcs. (+1 extra)
M3x12
M3x15
Wood Screw
Tapered Wood Screw
for Magnet
12 pcs. (+1 extra)
2 pcs. (+1 extra)
Level
888-680-7460, 877-831-0319
O.
Shelf
3 pcs.
P .
Foot Rest Support
3 pcs.
R.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
M6x25
Head Cap Bolt
Flat Washer
11 pcs. (+1 extra)
11 pcs. (+1 extra)
M6x10
Head Cap Bolt (short)
3 pcs. (+1 extra)
Knob
2 pcs.
M4x25
Machine Screw
2 pcs.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 20 05003 0992
Summary of Contents for Home Styles 20 05003 0992
- Page 1 12 pcs. (+1 extra) 3 pcs. (+1 extra) 1 pc. 2 pcs. (+1 extra) 2 pcs. Carton 20 05003 0991 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/7 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/7 Head Cap Bolt Flat Washer Cam Lock Figure 3 STEP 2 Place Top (A) upside down on a soft cloth. Attach Side Panels (D) and Front Panel (C) to Top (A) with Cam Locks. Attach Sub Top (B) to top unit with Head Cap Bolts and Flat Washers. (See Figure 3) Cam Lock STEP 3...
- Page 4 Assembly Instructions 4/7 STEP 4 Attach Magnet to Middle Panel (L) with Wood Screws for Magnet into pre-drilled holes. (See Figure 4) Figure 4 Wood Screw for Magnet Magnet STEP 5 Cam Lock Attach Side Panels (J) and (K) to unit from Step 3, then attach unit to Base (M) with Cam Locks.
- Page 5 Assembly Instructions 5/7 Drawer (R) Wood Screw (long) STEP 6 Roller at back Attach Drawer Front (R1) and Drawer Back (R2) to Drawer Side (R3) with Wood Screws (long). Wood Screw (long) STEP 7 Slide Drawer Bottom (R5) into the grooves of Drawer Front (R1) and Drawer Back (R2) until it meets Drawer Side (R3).
- Page 6 Assembly Instructions 6/7 Cam Lock Machine Screw Knob Flat Washer Head Cap Bolt Adjustable Pin STEP 9 Insert Adjustable Pins into middle panel and side panels at the desired level. (See Figure 5) Slide Shelves (O) into position. Attach Door (N) to unit by sliding door hinges into side panel hinges.
- Page 7 Assembly Instructions 7/7 Same amount of Foot Rest (Q) on each side Tapered Wood Screw Head Cap Bolt (short) STEP 10 Slide Foot Rest (Q) into Foot Rest Supports (P). Attach Foot Rest Supports (P) to unit with Tapered Wood Screws into pre-drilled holes.
- Page 8 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 05003 0992 and is the answer not in the manual?
Questions and answers