Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
F.
Back Stretcher
1 pc.
G.
Back Stretcher
1 pc.
H.
Front Stretcher
1 pc.
I.
Fixed Shelf
1 pc.
J.
K.
Shelf
Shelf
1 pc.
2 pcs.
Hardware List
Cam Lock
18 pcs. (+2 extra)
Tool(s) required for assembly: Phillips screwdriver, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05100 0302
Hutch
B.
Side Panel
1 pc.
L.
Middle Panel
1 pc.
M3.5x16
Wood Screw for Back Panel
12 pcs. (+1 extra)
Cam Lock Screw
18 pcs. (+1 extra)
Hutch
C.
Side Panel
1 pc.
M.
Middle Panel
1 pc.
Adjustable Pin
12 pcs. (+1 extra)
M4x13
Wood Screw for Bracket
8 pcs. (+1 extra)
888-680-7460, 877-831-0319
D.
E.
Back Panel
Back Upright
3 pcs.
2 pcs.
N.
O.
Door
Door
1 pc.
1 pc.
Knob
2 pcs.
M4x25
Machine Screw
Bracket
2 pcs.
2 pcs.
Advertisement
Related Manuals for Home Styles 20 05100 0302
Summary of Contents for Home Styles 20 05100 0302
- Page 1 Machine Screw Wood Screw for Bracket Bracket 18 pcs. (+1 extra) 8 pcs. (+1 extra) 2 pcs. 2 pcs. Tool(s) required for assembly: Phillips screwdriver, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/6 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the screws until each part is properly assembled. Cam Lock Screw Cam Lock Screw STEP 1 Insert Cam Lock Screws into pre-drilled holes in...
- Page 3 Assembly Instructions 3/6 STEP 3 Attach Fixed Shelf (I) to unit with Cam Locks. Cam Lock Cam Lock STEP 4 Attach Middle Panels (L) and (M) to unit with Cam Locks. Attach Front Stretcher (H) to unit with Cam Lock. Cam Lock Cam Lock STEP 5...
- Page 4 Assembly Instructions 4/6 Adjustable Pin STEP 6 Insert Adjustable Pins into side panels and middle panels at desired level. Place Shelves (J) and (K) into position. Attach Doors (N) and (O) to unit by sliding door hinges into side panel hinges. (See Figure 3) Attach Knobs to Doors (N) and (O) with Machine Screws.
- Page 5 Assembly Instructions 5/6 STEP 8 Insert Wood Screws for Back Panel into pre-drilled holes in unit. Wood Screw for Back Panel Wood Screw for Bracket Figure 5 Bracket STEP 9 Attach Hutch to Buffet with Brackets by inserting Wood Screws for Bracket into pre-drilled holes. (See Figure 5)
-
Page 6: Hardware List
Assembly Instructions 6/6 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 10 Pre-drilled hole Anchor in wall Bracket Wall Screw at top of unit on wall Place unit at desired location. - Page 7 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.