Advertisement
IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ
Do not use power tools above 8 volts to assemble.
Ÿ
Do not tighten all the screws until each part is properly assembled.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in
Top (A), Side Panels (B), (C) and Fixed Shelf (I),
then tighten. (See Figure 1)
B
F
D
D
E
G
Cam Lock
Assembly Instructions 2/6
Cam Lock Screw
C
Cam Lock
D
E
Figure 1
B
Attach Back Stretcher (G) to Side Panel (B)
Attach Back Uprights (E) to Back Stretcher (G).
Slide Back Panels (D) into position.
Attach Back Stretcher (F) to unit with Cam Lock.
Cam Lock Screw
Cam Lock Screw
A
Cam Lock Screw
Figure 2
with Cam Lock. (See Figure 2)
I
STEP 2
Advertisement
