Advertisement
IMPORTANT
Ÿ
To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly.
STEP 10
Place unit at desired location.
Drill a 3/8" hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tip-over Restraint through
Bracket on wall and Bracket on unit.
(See Figure 6)
Put tie end of Tip-over Restraint into lock
end of Tip-over Restraint and pull until tight.
Hardware List
Anchor
1 pc. (+1 extra)
Assembly Instructions 6/6
3/8" wall hole
Bracket
Tip-over Restraint
2 pcs. (+1 extra)
1 pc. (+1 extra)
Anchor in wall
Bracket
on wall
Tie end
Lock end
Bracket at
top of unit
Tip-over
Restraint
M3.5x40
Wall Screw
1 pc. (+1 extra)
Pre-drilled hole
Wall Screw
at top of unit
Wood Screw
Figure 6
Drill 3/8" hole in wall
Top of unit
M3.5x16
Wood Screw
1 pc. (+1 extra)
Advertisement
