Appendix 1.2 Technical Specifications Of Media; Appendix 2 Self-Test Page - AMT Datasouth Fastmark Z5DT Series User Manual

Appendix 1.2 technical specifications of media

Specifications of continuous media (unit: inches)
1)
Type
Continuous without adhesive
Continuous with adhesive
Discontinuous media specifications (unit: inches)
2)
Type
Discontinuous label
with adhesive
Discontinuous
punched
label/paper without
adhesive
Discontinuous
marked label/paper
without adhesive

Appendix 2 self-test page

Self-test page includes printer configuration information, printer internal fonts and print head test information.
The printer configuration information and printer internal fonts reflect the current internal configuration of the
printer, and the print head test information reflects the status of the print head.
Illustration
Table appendix 1.2-1
Illustration
Base paper width: 0.71"≤a≤4.72"
Paper margin width: b≤0.04"
Label width: 0.71"≤c≤4.65"
Label height:: d≥0.39"
Gap width: e≥0.08"
Punched paper width: 0.71"≤a≤4.72"
Punched paper height: b≥0.39"
Detection hole position: c≤a/0.08"
Detection hole width: d≥0.20"
Detection hole height: e≥0.08"
Marked paper width: 0.71"≤a≤4.72"
Marked paper height: b≥0.39"
Mark position: c≤a/0.08"
Mark width: d≥0.39"
Mark height: e≥0.16"
Table appendix 1.2-2
- 22 -
Z5
DT
Index
Print width: 0.71"≤a≤ 4.72"
Base media width:0.71"≤a≤4.72"
Print width: 0.71"≤b≤4.65"
Margin width: c ≤0.04"
Index
User's Guide