•
Save the operational statistics for each feature module of the device:
<H3C> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.tar.gz)[flash:/diag_H3C_20170223-125428.tar.gz]:
Diagnostic information is outputting to flash:/diag_H3C_20170223-125428.tar.gz.
Please wait...
Save successfully.
To view the contents of the default.diag file, execute the more default.diag command in user
view, and then press the Page Up and Page Down keys.
•
Display the operational statistics for each feature module of the device. (Details not shown.)
<H3C> display diagnostic-information
===============================================
===============display clock===============
11:37:04 UTC Mon 20/02/2017
=================================================
===============display version===============
H3C Comware Software, Version 7.1.064, Customer 5115P11
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C WX2510H uptime is 0 weeks, 1 day, 17 hours, 4 minutes
Last reboot reason : User soft reboot
...
Displaying detailed information about the device
Use the display device verbose command to display detailed information about the device.
<H3C>display device verbose
Slot No.
1
Table 5 Command output
Field
Slot No.
Board Type
Status
Max Ports
Displaying the electronic label data for the device
An electronic label is a profile of a device. It contains the permanent configuration, including the
serial number, manufacturing date, MAC address, and vendor name.
Use the display device manuinfo command to display the electronic label data for the device.
<H3C> display device manuinfo
DEVICE_NAME:WX2510H
DEVICE_SERIAL_NUMBER:219801A0WJH133000003
MAC_ADDRESS:000f-e212-6103
Subslot No. Board Type
0
WX2510H
Description
The value is fixed at 1.
Device type.
Device status:
•
Fault—The device is not operating correctly.
•
Normal—The device is operating correctly.
Maximum number of ports supported.
Status
Max Ports
Normal
5
12