Displaying information about the device
Use the display device command to display information about the device.
<H3C>display device
Slot No.
1
Table 7 Command output
Field
Slot No.
Board Type
Status
Max Ports
Displaying the electronic label data for the device
An electronic label is a profile of a device. It contains the permanent configuration, including the
serial number, manufacturing date, MAC address, and vendor name.
Use the display device manuinfo command to display the electronic label data for the device.
<H3C>display device manuinfo
Slot 1 CPU 0:
DEVICE_NAME:WX3510H
DEVICE_SERIAL_NUMBER:210235A1JNC14B900031
MAC_ADDRESS:000f-e212-6103
MANUFACTURING_DATE:2017-03-23
VENDOR_NAME:H3C
Table 8 Command output
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Displaying the CPU usage of the device
Use the display cpu-usage command to display the CPU usage statistics for the device.
<H3C>display cpu-usage
Slot 1 CPU 0 CPU usage:
0% in last 5 seconds
0% in last 1 minute
1% in last 5 minutes
Subslot No. Board Type
0
WX3510H
Description
IRF member device ID of the device.
Device type.
Device status:
•
Fault—The device is faulty and cannot start up correctly.
•
Normal—The device is operating correctly.
Maximum number of ports supported.
Status
Max Ports
Normal
16
Description
Device model.
Serial number of the device.
MAC address of the device.
Manufacturing data of the device.
Vendor name.
26