Displaying Detailed Information About The Device; Displaying The Electronic Label Data For The Device - H3C WX2540E Installation Manual

<H3C> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
14:56:35 UTC Mon 04/24/2017
===================================================
===============display version===============
===================================================
H3C Comware Platform Software
Comware Software,Processor
1024M bytes DDR3
16M bytes Flash Memory
1024M bytes Nand Flash Memory
Hardware Version is Ver.B
CPLD Version is 002
Basic Bootrom Version is 1.02
Extend Bootrom Version is 1.02
[Subslot 0]WX2540E Hardware Version is Ver.B
...

Displaying detailed information about the device

Use the display device command to display detailed information about the device.
<H3C> display device
Slot No.
1
Table 1 Command output
Field
Slot No.
Board Type
Status
Max Ports

Displaying the electronic label data for the device

An electronic label is a profile of a device. It contains the permanent configuration, including the serial
number, manufacturing date, MAC address, and vendor name.
Use the display device manuinfo command to display the electronic label data for the device.
<H3C> display device manuinfo
Subslot 0
Subslot No. Board Type
0 WX2540E
Description
Slot number.
Card model.
Operational status of the card:
•
Fault—The card in the slot has failed and cannot boot correctly.
•
Normal—The card in the slot is operating correctly.
Maximum number of interfaces that the card supports.
Status Max Ports
Normal 6
2