Displaying Information About The Device - H3C WX1800H Series Installation Manual

Last reboot reason : Watchdog reboot
Boot image: flash:/boot.bin
Boot image version: 7.1.064, Release 5204P01
Compiled Feb 22 2017 16:00:00
System image: flash:/system.bin
System image version: 7.1.064, Release 5204P01
Compiled Feb 22 2017 16:00:00
with 1 800MHz Processor
1024M bytes DDR3
1024M bytes NandFlash Memory
Hardware Version is Ver.A
BLE 1 Version is 1.0
Basic Bootrom Version is 0.22
Extend Bootrom Version is 0.22
[Subslot 0]WX1804H-PWR Hardware Version is Ver.A
================================================
===============display device verbose===============
Slot No.
1
Slot 1
Status: Normal
Type: WX1804H-PWR
Hardware: A
Driver: 0.22
...

Displaying information about the device

Use the display device command to display information about the device.
<H3C> display device
Slot No.
1
Table 5 Command output
Field
Slot No.
Board Type
Status
Max Ports
Subslot No. Board Type
0 WX1804H-PWR
Subslot No. Board Type
0 WX1804H-PWR
Description
Slot number.
Device type.
Device status:
•
Fault—The device is not operating correctly.
•
Normal—The device is operating correctly.
Maximum number of ports supported.
Status Max Ports
Normal
Status Max Ports
Normal 5
19
5