Table of Contents
Advertisement
B.1.2
CSV File Download
1.
Create the LUT table in Microsoft Excel format as shown in the left picture below and save as a CSV file
(*.csv). The picture in the right shows the created file opened in Notepad. Once the file has been created
completely, change the .csv file extension to .lut. The following rules need to be applied when creating the
file.
Lines beginning with ':' or '—' are treated as notes.
Based on the input values, make sure to record from 0 to 4095.
2.
Run Vieworks Imaging Solution 6.X and click the Configure button to display the window as shown below.
Select the LUT tab, select Luminance from the Type dropdown list, and then click the Load File button.
88 of 94
VA GigE series
RA14-131-003
Advertisement
Table of Contents
