Digital Domain - GigE VA Series User Manual

9.10.2

Digital Domain

VA GigE camera has a built in digital gain and black level control. XML parameters related to Gain and Black
Level are as follows.
XML Parameters
GainSelector
Gain
AnalogControl
GainAutoBalance
BlackLevelSelector
BlackLevel
†: Adjustable value range when the Gain Selector parameter is set to Analog All and the Gain parameter
is set to 1. The adjustable value range may vary depending on the Gain setting value for Analog All.
Table 9.12 XML Parameters related to Gain and Black Level
Value
AnalogAll Apply gain to all analog taps
AnalogTap1 Apply analog gain to Tap1
AnalogTap2 Apply analog gain to Tap2
DigitalRed Apply gain to red digital channel
DigitalGreen Apply gain to green digital channel
DigitalBlue Apply gain to blue digital channel
Set an absolute physical gain value.

Analog All: ×1.0 ~ ×40
-

Analog Tap1, 2: ×0.96 ~ ×65
Off Gain Auto Balance Off
Gain Balance for each tap is adjusted once and
Once
then Off
All Apply black level to all taps
Tap1 Apply black level to Tap1
Tap2 Apply black level to Tap2
Set an absolute physical black level value.
0~255
(0 ~ 127 LSB @ 12bit)
67 of 94
VA GigE series
Description
†
RA14-131-003