9.21 Device User ID
You can input user defined information up to 16 bytes.
XML parameter related to Device User ID is as follow.
XML Parameters
DeviceControl
DeviceUserID
9.22 Device Reset
Reset the camera physically to power off and on. You must connect to the network because the camera will be
released from the network after reset. XML parameter related to Device Reset is as follows.
XML Parameters
DeviceControl
DeviceReset
Input user defined information (16 bytes)
Table 9.22 XML Parameter related to Device User ID
Reset the camera physically
Table 9.23 XML Parameter related to Device Reset
82 of 94
Description
Description
VA GigE series
RA14-131-003