Table of Contents
Advertisement
9.23 User Set Control
You can save the current camera settings to the camera's internal ROM. You can also load the camera settings
from the camera's internal ROM. The camera provides two setups to save and three setups to load settings.
XML parameters related to User Set Control are as follows.
XML Parameters
UserSetSelector
UserSetLoad
UserSetControl
UserSetSave
UserSetDefaultSelector
9.24 Field Upgrade
The camera provides a feature to upgrade Firmware and FGPA logic through Gigabit Ethernet interface rather
than disassemble the camera in the field. Refer to
Value
Default
UserSet1
UserSet2
-
-
Default
UserSet1
UserSet2
Table 9.24 XML Parameters related to User Set Control
Appendix C
83 of 94
Description
Select the Factory Default settings
Select the User Set1 settings
Select the User Set2 settings
Load the User Set specified by User Set Selector
to the camera
Save the current settings to the User Set specified
by User Set Selector
Default is allowed to load only.
Apply the Factory Default settings when reset
Apply the User Set1 settings when reset
Apply the User Set2 settings when reset
for more details on how to upgrade.
VA GigE series
RA14-131-003
Advertisement
Table of Contents
