Table of Contents
Advertisement
7.3
Control Receptacle
The control receptacle is a Hirose 4 pin connector (part # HR10A-7R-4S) and consists of an external trigger
signal input and strobe output port. The pin assignments and configurations are as follows:
Pin Number
1
2
3
Programmable Output
4
(Default: Strobe Out)
The mating connector is a Hirose 4 pin plug (part # HR10A-7P-4P) or the equivalent connectors.
Figure 7.3 Pin Assignments for 4 Pin Control Receptacle
Signal
Trigger Input +
Trigger Input -
DC Ground
Table 7.2 Pin Arrangement of Control Connector
20 of 94
4
1
3
2
Type
Input
Input
-
Output
VA GigE series
Description
-
-
DC Ground
3.3 V TTL Output
Output resistance : 47 Ω
RA14-131-003
Advertisement
Table of Contents
