Table of Contents
Advertisement
7.4
Power Input Receptacle
The power input receptacle is a Hirose 6 pin connector (part # HR10A-7R-6PB). The pin assignments and
configurations are as follows:
Pin Number
1, 2 , 3
4 , 5 , 6
Connecting the power cable to the camera can be made by using the Hirose 6 pin plug (part # HR10A-7P-6S) or
the equivalent. The power adaptor is recommended to have at least 1A current output at 12 V DC ±10% voltage
output (Users need to purchase the power adaptor separately).
Precaution for Power Input
Make sure the power is turned off before connecting the power cord to the camera.
Otherwise, damage to the camera may result.
If the camera input voltage is greater than 16 V, damage to the camera may result.
Figure 7.4 Pin Assignments for Power Input Receptacle
Signal
+ 12V DC
DC Ground
Table 7.3 Pin Configurations for Power Input Receptacle
21 of 94
1
6
2
5
3
4
Type
Input
Input
VA GigE series
Description
DC Power Input
DC Ground
RA14-131-003
Advertisement
Table of Contents
