7 Camera Interface
7.1
General Description
As shown in the following figure, 3 types of connectors and status indicator LED are located on the back of the
camera and have the functions as follows:
① Status LED:
② RJ-45 Jack:
③ 4 pin Control Receptacle:
④ 6 pin Power Input Receptacle:
displays power status and operation mode.
controls video data and the camera.
inputs external trigger signal and outputs strobe.
supplies power to the camera.
Figure 7.1 VA GigE Series Back Panel
18 of 94
VA GigE series
①
②
③
④
RA14-131-003