Temperature Monitor; Fan Control (Only Available On Va-29Mg2) - GigE VA Series User Manual

9.14 Temperature Monitor

A sensor chip is embedded in the camera to monitor the internal temperature.
XML parameter related to Device Temperature is as follows.
XML Parameters
DeviceControl DeviceTemperature

9.15 Fan Control (Only available on VA-29MG2)

A fan is installed on the rear panel of the camera to radiate heat. You can set the fan to turn on or off. And also,
you can set the fan to turn on when a specified internal temperature is reached.
XML parameters related to Fan Control are as follows.
XML Parameters
FanOperationMode
FanControl
FanOperationTemperature
FanSpeed
Display device temperature in Celsius
Table 9.17 XML Parameter related to Device Temperature
Value
Off
On
Temperature
-10℃~80℃
-
Table 9.18 XML Parameters related to Fan Control
75 of 94
Description
Description
Turn off the fan
Turn on the fan
Turn on the fan when the internal temperature
exceeds the value set in the Fan Operation
Temperature parameter
Set the temperature to operate the fan when the
Fan Operation Mode parameter is set to
Temperature
Verify the current Fan RPM
VA GigE series
RA14-131-003