Digital Watchdog INFINITY 960H SNAP-IT DWC-D4567WD Manual page 25

MOTION
EXIT JUMP
EXIT Exit the OSD without saving.
SAVE & EXIT Exit the OSD after saving the current settings.
FACTORY SET Go back to factory default settings.
SHOW INDI. TRACE
Set the motion detection indicator to
OFF / ICON / TRACE If ICON is selected, a blue bell
.
will appear in the upper left hand corner of the screen
when motion is detected. If TRACE is selected, the area
where motion was detected will be highlighted.
DELAY OUT
Select how long the alarm will be dispayed on
the screen when motion is detected.
Choose from
1 to 15 seconds.
25