Digital Watchdog INFINITY 960H SNAP-IT DWC-D4567WD Manual page 21

DAY NIGHT
DAY & NIGHT
※ If AUTO is selected, please define the following settings.
▪ BURST: ON / Off. If ON is selected, the camera provides a color burst signal in
night mode. If OFF, no color burst signal is provided.
▪ COLOR → BW: Adjusts the light level at which the camera switches from
day (color) to night (BW) mode. The higher the number, the lower the light level.
▪ BW → COLOR: Adjusts the light level at which the camera switches from
night (BW) to day (color) mode. This number should be lower than the value of
COLOR→BW above.
READ TIME
Sets how many seconds camera waits to adjust between COLOR → BW and
3~12
BW → COLOR .
C_SUP.
Adjusts the color suppressing level. (3D-DNR must be OFF to adjust this level.)
0~100
A_SUP.
Adjusts aperture suppressing level. (3D-DNR must be OFF to adjust this level.)
0~100
EXIT JUMP
EXIT Exit the OSD without saving.
SAVE & EXIT Exit the OSD after saving the current settings.
FACTORY SET Go back to factory default settings.
AUTO
Camera switches between day and night
automatically depending on certain light
levels.
COLOR Camera always stays in day mode.
BW Camera always stays in night mode.
21