Scanned Area Of A Document - Canon imageCLASS D661 Reference Manual

Problem Documents
• Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen
glass or loading it into the ADF.
• Remove all fasteners (staples, paper clips, etc.) before loading the document into the ADF.
• To prevent document jams in the ADF, do not use any of the following:

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document. Make sure your document's text
and graphics are within this area.
• The scanning limit of documents set on the platen glass will differ depending on the MAX. SCAN
NOTE
LENGTH of 330 mm or 356 mm specified in COPY SETTINGS of the Additional Functions.
3-2
Wrinkled or creased paper
Carbon paper or carbon-
backed paper
MAX. 0.16"
(MAX. 4.0 mm)
SCANNING
DIRECTION
Curled or rolled paper
Coated paper Onion skin or thin paper
MAX. 0.08"
(MAX. 2.0 mm)
Letter/Legal
Torn paper
MAX. 0.08"
(MAX. 2.0 mm)
MAX. 0.08"
(MAX. 2.0 mm)