Energy Saver Mode; Setting The Energy Saver Mode Manually; Restoring From The Energy Saver Mode - Canon imageCLASS D661 Reference Manual

Energy Saver Mode

This machine provides an energy saver function. When no operations are performed for about 5 minutes, the
machine automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in the range from 3 minutes
NOTE
to 30 minutes. You can also turn off the energy saver function. (→ p. 7-4)
• The energy saver function does not activate when the machine is in the following status:
– When printing out copies or faxes* or other pages
– When sending or receiving faxes*
– While a copy job is saved in memory or when the reserve copy or other functions are operating, or
when the In Use/Memory indicator lights up*
– When paper jams occur
– When the platen unit is not returned to the original position
– When an error code appears and the Alarm indicator flashes
– When PRESS SET KEY is displayed
* Only for the imageCLASS D680 model

Setting the Energy Saver Mode Manually

1
Press Energy Saver.
• The LCD is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait
NOTE
about 5 seconds before pressing Energy Saver.

Restoring from the Energy Saver Mode

1
Press Energy Saver.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according
NOTE
to room temperature and circumstances.
1-8