Cleaning The Adf Roller - Canon imageCLASS D661 Reference Manual

I Cleaning the ADF Roller
If the ADF roller is dirty, the documents will be dirty after you feed them into the ADF. In this case, you can
clean the ADF roller using the Additional Functions.
• If a paper jam occurs in the ADF, remove jammed paper from the ADF (→ p. 6-3), then perform the
procedure below.
NOTE
1
Press Additional Functions.
Use 4 (–) or e (+) to select
2
ADJUST/CLEAN.
3
Press Set.
Use 4 (–) or e (+) to select CLEAN ADF
4
ROLLER.
A D J U S T / C L E A N
2 . C L E A N A D F R O L L E R
5
Open the ADF.
• If you attempt to clean the ADF roller when the
ADF is closed, OPEN THE ADF appears.
6
Press Set.
S T A R T C L E A N : [ S E T ]
E N D C L E A N : [ S T O P ]
7
Each time you press Set, the ADF roller
rotates about 1/3 of the roller. Wipe the
ADF roller with a dry cloth.
• Repeat this step until the ADF roller becomes
clean.
• Do not touch the ADF roller being rotated.
Your fingers or clothing may be pinched in
IMPORTANT
the roller, resulting in personal injury.
8
Press Stop/Reset to finish the cleaning.
• The LCD returns to standby display.
ADF roller
5
5-3