Scanned Area Of A Document - Canon MultiPASS F30 Reference Manual

Problem Documents
• Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen
glass or loading it into the ADF.
• Remove all fasteners (staples, paper clips, etc.) before loading the document into the ADF.
• To prevent document jams in the ADF, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-
backed paper

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document. Make sure your document's text
and graphics are within this area.
MAX. 0.16"
(MAX. 4.0 mm)
Letter/Legal*/A4
* When using legal-size documents with the F50 model, load them into the ADF.
** F50 model only
*** When using legal-size documents with the F30 model, the bottom margin is MAX. 0.32 in. (MAX 8.0 mm)
2-2
Curled or rolled paper
Coated paper
***
MAX. 0.16" (MAX. 4.0 mm)
COLOR FAX: MAX. 0.24" **
(MAX. 6.0 mm)
MAX. 0.18"
(MAX. 4.5 mm)
MAX. 0.18"
(MAX. 4.5 mm)
Torn paper
Onion skin or thin paper