Loading Paper In The Multi-Purpose Tray - Canon imageCLASS D661 Reference Manual

Loading Paper in the Multi-purpose Tray

Use the multi-purpose tray when you want to print on special paper, such as envelopes, transparencies, labels or
heavy paper. You can place up to 100 sheets of 20-lb bond (80 g/m
mm high) in the multi-purpose tray to be automatically fed into the machine.
1
Open the multi-purpose tray.
2
Pull out the paper tray.
3
Load the paper stack facing up into the
multi-purpose tray.
4
Adjust the slide guides to fit the size of the
paper stack.
2-6
2 ) paper stack (a stack approximately
• If the slide guides are not adjusted correctly
for the paper size, the quality of your print
IMPORTANT
images may be adversely affected.
• When making copies on LTR-size paper
NOTE
after having continuously copied on paper
smaller than LTR-size paper, the copies
may be dirty. To prevent copies from being
dirty, wait about one minute before making
copies.
• Insert the paper stack into the machine as
far as it will go.
• If the paper is curled, uncurl it before
placing it in the multi-purpose tray. Failure
to do so will cause paper creases and a
paper jam.
• 16 to 32-lb bond (56 to 128 g/m
acceptable.
• Make sure that the paper stack does not
exceed the paper limit guide.
• Some types of paper may not feed properly
into the multi-purpose tray. For high-
quality copies, be sure to use the paper and
transparencies recommended by Canon.
(→ p. 2-1)
• Load transparencies one by one.
• When making copies of a small size
document or thick paper, etc., the copy
speed may be slightly slower than usual.
• To specify the paper size every time you
load the paper into the multi-purpose tray,
follow the procedure below:
Press Additional Functions, then
select:
COMMON SETTINGS,
MP TRAY PAPERSIZE,
OFF,
SET ON LOADING.
Load the paper into the multi-purpose
tray, and choose the paper size using
4 (–) or e (+), then press Set.
For details, refer to "Selecting the Paper
Feeding Location (Cassette or Multi-
purpose Tray)." (→ p. 4-3)
3 / " or 10
16
2 ) paper is