Problem Documents; Scanned Area Of A Document - Canon Color imageCLASS MF8170c Basic Manual

NOTE
When making copies of a small size document, the copy speed may be slightly slower
than usual.

Problem Documents

Make sure any glue, ink, or correction fluid on the document is completely dry
before placing it on the platen glass or loading it in the ADF.
Remove all fasteners (staples, paper clips, etc.) before loading the document in
the ADF.
To prevent document jams in the ADF, do not use any of the following:
- Wrinkled or creased paper
3
- Curled or rolled paper
- Torn paper
- Hole-punched paper

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document.
Make sure your document's text and graphics are within this area.
3-2 Document Requirements
- Carbon paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
13
MAX. / " (5.0 mm)
64
Scanning
direction
1
MAX. / " (3.0 mm)
8
MAX.
LTR
MAX. 1 / " (3.0 mm)
8
1 / " (3.0 mm)
8