Two-Sided Copy - Canon imageCLASS D661 Reference Manual

Two-Sided Copy

Using the multi-purpose tray, you can copy 2 documents on opposite sides of a single sheet.
I When Loading Documents in the ADF
1
Load the first page of the document face
down in the ADF, then press Start to begin
copying.
2
Load the next page of the document in the
ADF.
Portrait orientation documents:
Load the page so that the top edge is
opposite to the top edge of the previous
page.
Landscape orientation documents:
Load the page so that the orientation is the
same as the previous page.
3
Turn over the copy you made in step 1 to
make sure that the inner and front side of it
will remain in the same position as shown
below, then insert it into the multi-purpose
tray.
Copy of the first page of the
document
Turn over the
copy
Inner side
Front side
• If the copied sheet is curled, uncurl it
before inserting it into the multi-purpose
NOTE
tray. Failure to do so will cause paper
creases and paper jams.
4
Press Paper Select to select the multi-
purpose tray.
• For details, refer to p. 4-3.
5
Press Start to copy the next page to finish
making your two-sided copy.
Insert
4
4-13