Table of Contents
Advertisement
Weight
1
*
When scanning, copying, and sending a transparent document such as tracing paper or transparencies, place a
piece of plain white paper behind the document.
2
*
21 lb (80 g/m
NOTE
When making copies of a small size document, the copy speed may be slightly slower
than usual.
Problem Documents
3
•
Make sure any glue, ink, or correction fluid on the document is completely dry
before placing it on the platen glass or loading it in the ADF.
•
Remove all fasteners (staples, paper clips, etc.) before loading the document in
the ADF.
•
To prevent document jams in the ADF, do not use any of the following:
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
- Hole-punched paper
Scanned Area of a Document
The shaded area in the illustration below shows the scanned area of a document.
Make sure your document's text and graphics are within this area.
3-2
Document Requirements
Platen Glass
Max. 4.4 lb (2 kg)
2
) paper
7
MAX.
/
" (5.5 mm)
32
Scanning
direction
17 lb to 28 lb
2
(64 g/m
to 105 g/m
- Carbon paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
7
MAX.
/
" (5.5 mm)
32
MAX.
LTR
MAX.
1
/
" (3 mm)
8
ADF
2
)/document
1
/
" (3 mm)
8
Advertisement
Table of Contents
