Yamaha XVS250 2001 Service Manual page 52

L Clamp the wireharness, high
tersion code (#2) and throttle
position sensor lead.
M To the speedometer.
N Clamp the wireharness, left
handlebar switches lead, clutch
switch lead, right handlebar
switches lead and high tension
code (#2).
O Do not slack the leads this area.
CABLE ROUTING
P Clamp the wireharness, left
handlebar switches lead, clutch
switch lead, right handlebar
switches lead, front brake switch
lead, throttle cable, starter cable
and thermo switch lead.
Q Put the alarm coupler to this
area. (surrourded by inner panel).
R Bend over the alarm lead and
cramped it with wireharness.
S To starter motor.
2-30
SPEC