CLUTCH
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the fric-
tion plates.
1. Check:
D friction plate
Damage/wear Replace the friction plates
as a set.
2. Measure:
D friction plate thickness
Out of specification Replace the friction
plates as a set.
NOTE:
Measure the friction plate at four places.
Friction plate thickness
2.9
<Limit>: 2.5 mm
EAS00281
CHECKING THE CLUTCH PLATES
The following procedure applies to all of the
clutch plates.
1. Check:
D clutch plate
Damage Replace the clutch plates as a
set.
2. Measure:
D clutch plate warpage
(with a surface plate and thickness gauge 1 )
Out of specification Replace the clutch
plates as a set.
Clutch plate warpage limit
Less than 0.05 mm
5-44
ENG
3.1 mm