Table of Contents
Advertisement
Step 8 – Install Ladder Hook Bracket to Bow
Using two 3/8" x 1" carriage
bolts, 3/8" flat washers and
3/8" lock nuts, bolt ladder
hook bracket to the bow in
the orientation shown. Be
sure the bracket is square to
the bow.
TIGHTEN.
Ladder clamp on the ladder stop
assembly is adjustable. When
finished, clamp must be adjusted
to fit firmly against your ladder.
Step 9 – Install Feet
Measure width between mounting locations.
On the cross bows, use the slots that correspond to the measured distance between rails.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
WIDTH OF RAILS
CENTERED
Instructions – 4A83L
Page 10
Advertisement
Table of Contents
