Step 4 Install Into Van - Kargo Master 406SL Installation Manual

Step 4 – Install into Van
• Place partition with wings into van.
Have the wings orientated towards
the "B" pillars.
• Press firmly against the "B" pillars
and the support across the roof.
• Square the bottom of the partition.
• Tighten all bolts connecting wings
to partition.
• Install using self tapping hardware.
• Use the .75" hex bolt (3) along the
"B" pillars and across the roof.
• Use the 1.25" hex bolt (4) in floor.
GO BACK AND TIGHTEN
ALL BOLTS
YOUR INSTALLATION IS
NOW COMPLETE
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Install Instructions – 406SL
Page 6